Features & Performance & Technical Specifications.

Fy1600, this model laminator is our hot selling model because of his perfect design ! Low Cost durable heating silicon gel roller, can be used for cold or hot lamination. Swing out auto grip shaft and reversiable table is for perfect lamination.

  Features of Metal Laser Cutting Machine
  Powerful Hardware Configuration.

The hardware of closed- loop control system consists of BMC1214 four axis motion card and BCL3724 terminal board. The system adopts high- precision 16- bit DA chip with low- noise and low-drift coefficient signal; Powerful real- time computing power is provided by High-performance ARM processor and FPGA coprocessor; The system can run more fast and smooth owning to 32 large capacity SDRAM memory; Reliable communication can be still achieved in harsh industrial environment due to high- speed differential communication bus. The system is safe, reliable and easy to manage due to coming with its time encryption and decryption function without needing other dongle..


New function of CypCut cutting software
Better speed, better convenience, better security and better use;

  Start processing immediately without waiting.

It can operate with smooth, high-speed and precision due to leading high-speed NURBS real-time interpolation, and start processing in any position without waiting. Whenever stop, alarm or power-down happens, it can continue to work from the breakpoint.

  One Graph, Numerous Processes.

You can complete a variety of processes by drawing only one graph. Pre-piercing: Piercing in advance according to your graph. Cutting with a film: Cutting after eliminating the film by stripping process. Secondary cooling: Processing once following immediate cooling along track.

  Fast & Practical Scanning Cutting.

Now it is possible to scan and cut straight line in any direction, and to naturally and progressively cut circular arc of arbitrary arrangement. We can ensure the tangent between circular arc and scan with smooth and high-speed.

  Convenient Seeking- Edge & Locating.

Not only capacitive seeking- edge, but also infrared and visual orientation can be easily operated using BCS100. The position and angle can be simultaneously determined in any case mentioned above.

 Version V3.0
Max Moving Speed 999 mm/s
Max Acceleration 2G
Vibration Elimination Following the front point & edge with easy vibration
Capacitance Mutation Restraint 10%
Min Adaptable Inflexibility Requirement 2 hz
Firmware Upgrade U Disk / Ethernet
DA Resolution 16 Bit
DA zero drift 3 Mv
DA Response Time 0.01 Mv
DA Linearity 0.1%
Positioning Accuracy 0.001 mm
Alarm Information & power Down Save Yes

Approx, laminating speed(m/min)


Max Working width


Roller Diameter(mm)


Mounting Thickness(mm)


Warm-up roller heater system


Hot roller heater system

Internal Infrared

Laminating tempeture

Enviroment ~ 120 degree

Upper roll lift up mode

Air Compressor

Speed / temp Control

Micro Control

Film core (mm)


Power Supply


Power Consumption(w)


Machine Weight(kg)


Remark : Above Specifications are subject to change without prior notice.

Chikkabanaswadi Main Road,
Subbaiahna Palya
+91 80 2542 0650 / 98451 96405
Mon-Fri 8:30am-6:30pm
24 X 7 online support